Machine Delivery |
| Fields outlined in red and marked by an * are required. |
| Installing Dealer:* | |
| Installed By:* | |
| Installer e-mail:* | |
| Location: (City, State)* |
|
| Country: | |
| Install Date:*
| |
|
|
|
|
| End-User Company Name:* | |
| End-User Job Description:* | |
| End-User Contact:* | |
| Address:* | |
| City/State:* |
|
| Country: | |
| Zip:* | |
| Phone:* | |
| Fax:* | |
| Email:* | |
| Model:* | |
| Serial #:* | |
| Key Switch Hour Meter:* | |
| Buyer's representative has received instruction in proper operation of the following controls and features: |
| All Machines |
Checking battery electrolyte level, electrolyte condition monthly, and check that battery terminals are proplery torqued to 10 ft/lbs.
YES NO |
Parking brake override
YES NO |
Charging operation and customer understands batteries have limited "cycles" and recharging = 1 cycle
YES NO |
Seat and steering wheel adjustment
YES NO |
Customer has read and understands the list of WARNINGS in the Operator and part's manual
YES NO |
Battery and Machine Maintenance Guide posters hung up and reviewed
YES NO |
Manufacturer's website is a good source of information (Videos, PM Sheets) and sign up for quarterly newsletter's
YES NO |
Operators and Parts manuals were delivered, reviewed, undertood, and confirmation preventive maintenance is done every 100 hours of use and recorded on PM Sheets provided online or in manuals.
YES NO |
| Scrubbers |
Filling solution tank, Solution tank sight tube, Solution drain hose or valve for flushing and freezing conditions.
YES NO |
Adjusting controls & operation, Double scrubbing, Squeegee lift delay, Hight Recovery RED Light, vacuum switch (horn honking) and vacuum timer
YES NO |
Recovery tank draining & cleaning, Common Squeegee hose clog points, vacuum screen removal and cleaning, drain saver basket emptied.
YES NO |
Shroud and pad/brush removal and installation
YES NO |
Side Wiper and Curtain adjustment and maintenance for water control
YES NO |
Solution valve and filter operation (removal and cleaning)
YES NO |
LCD display operation, 4 hour meters (key switch, brush, traction drive, vacuum)
YES NO |
Tank tilt back feature, only when both tanks are fully drained
YES NO |
Squeegee hose removal and checking for clogs
YES NO |
| Burnishers |
Train and have customer demonstrate proper removal and replacement of burnishing pad
YES NO |
Pad pressure gauge and proper operating range to avoid tripping the circuit breaker
YES NO |
| Sweepers |
Demonstrate proper removal and replacement of main broom and side brooms
YES NO |
Method for cleaning the dust filter, emptying out the debris hopper and correct installation
YES NO |
Correct operation of the main broom and side broom levers, and understands to park with brushes in UP position
YES NO |
Trained on the "Wet-Sweep" bypass door and not to operate through standing water
YES NO |
| EDGE Machines |
EDGE scrubbers must have their isolators & deck hour meter replaced after 250 hours of use.
YES NO |
Customer understands the Grip Face is not warranted against damage from improper use or direct contact with the floor
YES NO |
| In addition to the above items the buyers representative has received the operator's and part's manual and been advised to read the manual before operating the machine. |
| |
|
